INTEK ADHESIVES

RTV SILICONE SEALANTS AND ADHESIVES

Home.Cyanoacrylates.Engineering Sealants.Electronics Products.Adhesives & Maintenance.Contacts Us.

Home

Product Description

RTV102, RTV103, RTV106, RTV108, RTV112, RTV116 and RTV118

One−component, ready−to−use adhesive sealants are extremely versatile.

They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric
moisture at room temperature. Acetic acid vapours are released from the
sealant surface as a by−product of cure.
 

RTV102, RTV103 and RTV108 sealants are standard strength paste consistency products
which can be applied to vertical and overhead surfaces where pourable/self−leveling sealants are not practical.
 

RTV112 and RTV118 sealants are self−levelling products which are preferable to paste−consistency sealants when flow

into small crevices and hard−to−reach places is desired.
 

RTV106 sealant is paste−consistency sealant. RTV116 sealant is a self−leveling sealant.

Both RTV106 and RTV116 sealants are standard strength high−temperature sealants.

Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm

Where section depths exceed 6mm (1/4 in.), GE Silicones one component, addition cure or two−component silicone rubber compounds are recommended.
 

Key Performance Properties:

· One−component products

· Capability to cure at room temperature and ambient humidity

· Self adhesion properties

· Low temperature flexibility

· High temperature performance

· Excellent weatherability and ozone and chemical resistance

· Excellent electrical insulation properties

 

GE Momentive Silicones

Intek Adhesives Ltd

Unit 20, Atley Business Park

Cramlington, Northumberland

NE23 1WP

Advice:

paul@intek-uk.com

Questions:

enquiry@intek-uk.com

 

01670 734400

OR...

0845 2600382

( Local Call Rate )

Orders:

Karen@intek-uk.com