Food grade sealant, FDA approved
adhesive, aluminium colour, stainless steel coloured,
catering sealant, kitchen sealants,
ag300, ag 300, metal colored, color, RTV
Food Grade Metal Coloured RTV Silicone
Sealant for Stainless Steel, Aluminium & most metals
AG300 adhesive & sealant is a one part food grade metallic silver RTV which is
suitable for sealing surfaces likely to come into contact
with food during manufacture. AG300 conforms to FDA
regulations and has the added benefit of being metallic
silver
coloured to be compatible with aluminium and stainless
steel metal work and fabrications especially in the pharmaceutical
and catering industries.
Typical applications include:
Bonding and sealing surfaces likely to come
into contact with food
High Temperature sealing up to 300C for
ducting & HVAC
Industrial sealing applications where a
stainless steel
coloured sealant is required
Bonding, sealing and gasketing where a fast
cure silicone sealant is required
| Viscosity |
Non-slump paste |
| Colour |
Metallic Silver |
| Specific Gravity |
1.18 |
| Tack-free time |
4 minutes |
| Curing time |
Approx. 2mm / 6 - 8 hours |
|
Curing system |
Acetoxy
|
(Based
on typical values for a 3mm sheet cured at 23ēC and 65%
Relative Humidity for 7 days)
| Thermal Conductivity |
0.20 wm/K |
| Dielectric Strength |
18 kV/mm |
| Hardness, Shore A |
50 |
| Tensile Strength |
2.93 mPa |
| Elongation |
174% |
| Temperature Range |
-55 to +300 C
- For high temperature
over 300C See
XTS320 adhesive sealant
|
Adhesion
AG300 silicone sealant bonds well to metals, most plastics, silicone
rubber & general engineering materials. Some substrates
may require a primer please ask.
Chemical Resistance
Excellent tolerance to alkalis, dilute acids, mineral
oils, water, steam, ozone & U.V. light. Incidental
contact with cleaning solvents & fuels is acceptable
but not recommended for continuous immersion.
Whilst
all reasonable care is taken in compiling technical data
on the company's products, all recommendations or suggestions
regarding the use of such products are made without guarantee
since the conditions of use are beyond the control of
the company.
It
is the customer's responsibility to satisfy himself that
each product is fit for the purpose for which he intends
to use it, and that the actual conditions.
