| |
Heat Resistant
Sealant, adhesive, sealants, Adhesives, heat proof sealer,
glue
XTS
320
High Temperature RTV
Silicone Adhesive and Sealant
High Strength, Non Corrosive
and Oil and Chemical Resistant
XTS
320 is an exceptional product designed to bond, seal, insulate,
weatherproof and make gaskets.
XTS
320 has excellent electrical insulation properties and because
it is virtually unaffected by temperature, weather extremes,
oil, chemicals or aging it performs under severe operating
conditions. Our special formulation allows XTS 320 to withstand
temperatures variations of –
55 to + 320ºC (350ºC
Intermittently) and its non slump paste viscosity allows
it to be applies vertically or overhead with faster curing
times than most other neutral curing RTV silicones.
NATO
stock classification 5970-99-224-1408
Industrial applications include:
● Sealing of heating and ventilation equipment
& ductwork chimneys, flue stacks
● Weatherproofing and insulating cable connectors
and high voltage equipment.
● Oil and chemical resistant gasket making.
●
Sealing and bonding on vibration prone machines
and appliances
●
Bonding heating elements and making gaskets
for steam irons
●
High temperature bonding or sealing applications,
auto gaskets (except constant fuel immersion)
| Appearance |
Extrudable paste |
| Colour |
Tan |
| Sag or Slump |
Non |
| Solids Content, % w/w |
100 |
| Tack Free Time, minutes |
<15 at 65% RH and 15 to 25ºC |
| Curing time |
2mm per 24 hours |
(Based
on typical values for a 3mm sheet cured at 23ºC and 65%
Relative Humidity for 7 days)
| Tensile Strength, MPa (psi) |
28 (400) |
| Elongation at Break, % |
250 |
| Hardness, Shore A |
35 approx |
| Specific Gravity |
1.08 |
| Dielectric Strength |
20 kV/mm |
| Temperature Range |
-50 to +320ºC (350ºC intermittent) |
Whilst
all reasonable care is taken in compiling technical data
on the company's products, all recommendations or suggestions
regarding the use of such products are made without guarantee
since the conditions of use are beyond the control of the
company.
It
is the customer's responsibility to satisfy himself that
each product is fit for the purpose for which he intends
to use it, and that the actual conditions of use are suitable
|
