| |
Thermally
Conductive Adhesive, Flame Retardant RTV, UL94, UL94 V0
silicone sealant
RTV 1073 Thermally Conductive
Adhesive, Flame Retardant UL94V0
Technical Data
RTV 1073 - Thermally conductive adhesive
RTV
1073 is a one part thermally conductive adhesive which cures
at room temperature to form a tough, durable rubber.
The curing system is non-corrosive making it ideal for electronics
applications. Typical uses include :
Industrial applications include:
Bonding Heatsink & Transistors to PCB's
High temperature thermally conductive
adhesive for electronic components
Vibration Proofing, Insulating & Strain
Relief of coils and bare copper wires
Flame Retardant Sealing of hazardous equipment
e.g. lighting, underground transport
Any application where a Underwriters Laboratories
(U.L.) approved product is require
| Viscosity |
Non-slump Paste |
| Colour |
Black |
| Specific
Gravity |
1.31 |
| Tack Free Time, minutes |
10
- 15 Minutes |
| Curing time |
Approx. 3mm / 24 hours |
| Thermal Conductivity |
0.58 wm/K |
| Dialectric Strength |
20
kV/mm |
| Hardness
Shore A |
45 |
| Tensile
Strength |
1.9
mPa |
| Temperature Range |
-55 to +220șC (260șC intermittent) |
Adhesion
RTV 1073 adhesive bonds well to metals, most plastics,
silicone rubber & general engineering materials. Chemical Resistance
Excellent tolerance to alkalis, dilute acids, mineral
oils, water, steam, ozone & U.V. light. Incidental
contact with cleaning solvents & fuels is acceptable
but not recommended for continuous immersion
Whilst
all reasonable care is taken in compiling technical data
on the company's products, all recommendations or suggestions
regarding the use of such products are made without guarantee
since the conditions of use are beyond the control of the
company.
It
is the customer's responsibility to satisfy himself that
each product is fit for the purpose for which he intends
to use it, and that the actual conditions of use are suitable
Back
to electronics
|
